IEI Technology PCISA-LX User Manual Download Page 138

Page: 138 / 214

Page 138

IEI® Technology, Corp

PCISA-LX CPU Card

6.1 Available Software Drivers

NOTE:

The content of the CD may vary throughout the life cycle of

the product and is subject to change without prior notice. You

may visit the IEI website or contact technical support for the

latest updates.

The PCISA-LX CPU card has five software drivers:

VGA Driver

Audio Driver

LAN Driver

SATA/RAID Driver

6.2 ISA Driver

All five drivers can be found on the CD that came with the CPU card. To install the drivers

please follow the instructions in the sections below.

Insert the CD into the system that contains the PCISA-LX CPU card.

NOTE:

If your system does not run the "autorun" program when the

CD is inserted, click the

Start

button, select

Run

, then type

X:\autorun.exe

(replace

with the actual drive letter for your

CD-ROM) to access the

IEI Driver CD

main menu.

Summary of Contents for PCISA-LX























































































































































































































Search results

Summary of Contents for PCISA-LX

Reviews:

Brands by name

Popular brands

IEI Technology PCISA-LX, User Manual

Search results

Summary of Contents for PCISA-LX

Reviews:

Brands by name

Popular brands