IEI Technology PCISA-LX User Manual Download Page 105

Page: 105 / 214

Page 105

PCISA -LX CPU Card

Boot Other Device [Enabled]

Use the

Boot Other Device

option to determine whether the system uses a second or

third boot device if the first boot device is not found.

Disabled

The system does not look for second and third boot

devices if the first one is not found.

Enabled

EFAULT

The system looks for second and third boot devices if the

first one is not found.

Swap Floppy Drive [Disabled]

The

Swap Floppy Drive

option is effective only in systems with two floppy drives.

Selecting

Enabled

assigns physical drive B to logical drive A, and physical drive A to

logical drive B.

Enabled

Assigns physical drive B to logical drive A, and physical

drive A to logical drive B.

Disabled

EFAULT

Default physical/logical drive assignations.

Boot Up Floppy Seek [Disabled]

Use the

Boot Up Floppy Seek

option to enable the BIOS to determine if the floppy disk

drive installed has 40 or 80 tracks during the POST. 360K FDDs have 40 tracks while

760K, 1.2M and 1.44M FDDs all have 80 tracks.

Disabled

EFAULT

BIOS does not search for the type of FDD drive by track

number. Note that there is no warning message if the

drive installed is 360K.

Enabled

BIOS searches for a FDD to determine if it has 40 or 80

tracks. Note that BIOS cannot tell the difference between

720K, 1.2M or 1.44M drives as they all have 80 tracks.

Summary of Contents for PCISA-LX























































































































































































































Search results

Summary of Contents for PCISA-LX

Reviews:

Brands by name

Popular brands

IEI Technology PCISA-LX, User Manual

Search results

Summary of Contents for PCISA-LX

Reviews:

Brands by name

Popular brands