IEI Technology PCISA-LX User Manual Download Page 104

Page: 104 / 214

Page 104

IEI® Technology, Corp

PCISA-LX CPU Card

SATA Boot ROM Control [Disabled]

Use the

SATA Boot ROM Control

option to configure SATA IDE use in DOS mode.

Disabled

EFAULT

Disables SATA IDE use in DOS mode.

Enabled

Enables SATA IDE use in DOS mode.

Boot Device

Use the

Boot Device

options to select the order of the devices the system boots from.

There are three boot device configuration options:

First Boot Device [Default: Floppy]

Second Boot Device [Default: HDD-0]

Third Boot Device [Default: CDROM]

Using the default values, the system first looks for a floppy disk to boot from. If it cannot

find a floppy disk, it boots from an HDD. If both the floppy and the HDD are unavailable,

the system boots from a CDROM drive.

Boot Device configuration options are:

Floppy

LS120

HDD-0

SCSI

CDROM

HDD-1

ZIP100

USB-FDD

USB-ZIP

USB-CDROM

USB-HDD

LAN

Disabled

Summary of Contents for PCISA-LX























































































































































































































Search results

Summary of Contents for PCISA-LX

Reviews:

Brands by name

Popular brands

IEI Technology PCISA-LX, User Manual

Search results

Summary of Contents for PCISA-LX

Reviews:

Brands by name

Popular brands