IEI Technology PCISA-LX User Manual Download Page 26

Page: 26 / 214

Page 26

IEI® Technology, Corp

PCISA-LX CPU Card

2.6 Graphics Support

Table 2-1

lists the PCISA-LX graphics processor features.

Feature

AMD Geode™ LX Processor

Color Depth

8, 16, 32 bpp (A) RGB 4 and 8-bit indexed

ROPs

256 (2-src, dest and pattern)

BLT Buffers

FIFOs in Graphics Processor

BLT Splitting

Managed by hardware

Video Synchronized BLT/Vector

Throttle by VBLANK

Bresenham Lines

Yes

Patterned (stippled) Lines

Yes

Screen to Screen BLT

Yes

Screen to Screen BLT with mono expansion

Yes

Memory to Screen BLT

Yes (throttled rep movs writes)

Accelerated Text

Pattern Size (Mono)

8x8 pixels

Pattern Size (Color)

8x8 pixels

Monochrome Pattern

Yes (with inversion)

Dithered Pattern (4 color)

Color Pattern

8, 16, 32 bpp

Transparent Pattern

Monochrome

Solid Fill

Yes

Pattern Fill

Yes

Transparent Source

Monochrome

Color Key Source Transparency

Y with mask

Summary of Contents for PCISA-LX























































































































































































































Search results

Summary of Contents for PCISA-LX

Reviews:

Brands by name

Popular brands

IEI Technology PCISA-LX, User Manual

Search results

Summary of Contents for PCISA-LX

Reviews:

Brands by name

Popular brands