IEI Technology PCISA-LX User Manual Download Page 93

Page: 93 / 214

Page 93

PCISA -LX CPU Card

Key

Function

Previous values for the page menu items

Fail-safe defaults for the current page menu items

Optimized defaults for the current page menu items

Menu in BIOS

F10

Save changes and Exit BIOS

Table 5-1: BIOS Navigation Keys

5.1.3 Getting Help

When

is pressed a small help window describing the appropriate keys to use and the

possible selections for the highlighted item appears. To exit the Help Window press

the

key again.

5.1.4 Unable to Reboot After Configuration Changes

If the system cannot be booted after changes are made, restore the CMOS defaults. To

restore CMOS defaults, follow these steps:

Step 1:

Step 2:

Step 3:

Unplug the battery connector.

Remove the battery.

Plug in the battery connector.

5.1.5 Main BIOS Menu

Once the BIOS opens, the main menu (

BIOS Menu 1

) appears.

Summary of Contents for PCISA-LX























































































































































































































Search results

Summary of Contents for PCISA-LX

Reviews:

Brands by name

Popular brands

IEI Technology PCISA-LX, User Manual

Search results

Summary of Contents for PCISA-LX

Reviews:

Brands by name

Popular brands