IEI Technology NANO-ULT5 User Manual Download Page 98

Page: 98 / 147

NANO-ULT5 SBC

Page 84

5.3.4 ACPI Settings

The

ACPI Settings

menu (

BIOS Menu 6

) configures the Advanced Configuration and

Power Interface (ACPI) options.

Advanced

ACPI Settings

ACPI Sleep State

[S3 (Suspend to RAM]

Select the highest ACPI

sleep state the system

will enter when the

SUSPEND button is

pressed.

----------------------



: Select Screen

↑

↓

: Select Item

Enter Select

+/-: Change Opt.

F1: General Help

F2: Previous Values

F3: Optimized Defaults

F4: Save & Exit

ESC: Exit

BIOS Menu 6: ACPI Settings



ACPI Sleep State [S3 (Suspend to RAM)]

Use the

ACPI Sleep State

option to specify the sleep state the system enters when it is

not being used.



S3 (Suspend to
RAM)

EFAULT

The caches are flushed and the CPU is powered
off. Power to the RAM is maintained. The
computer returns slower to a working state, but
more power is saved.

Summary of Contents for NANO-ULT5




















































































































































Search results

Summary of Contents for NANO-ULT5

Reviews:

Related manuals for NANO-ULT5

Brands by name

Popular brands

IEI Technology NANO-ULT5, User Manual

Search results

Summary of Contents for NANO-ULT5

Reviews:

Related manuals for NANO-ULT5

Brands by name

Popular brands