IEI Technology NANO-ULT5, User Manual

Page: 71 / 147

NANO-ULT5 SBC
Page 57
4.5 PCIe Mini Card Installation
To install a full-size PCIe Mini card, please follow the steps below.
Step 1:
Locate the full-size PCIe Mini card slot. See
Chapter 3
.
Step 2: Remove the retention screw as shown in Figure 4-4 .
Figure 4-4: Removing the Retention Screw
Step 3:
Line up the notch on the card with the notch on the slot. Slide the PCIe Mini card into
the socket at an angle of about 20º ( Figure 4-5 ).
Figure 4-5: Inserting the Full-size PCIe Mini Card into the Slot at an Angle
Step 4: Secure the full-size PCIe Mini card with the retention screw previously removed
(
Figure 4-6
).