IEI Technology NANO-ULT5, User Manual

Page: 115 / 147

NANO-ULT5 SBC
Page 101
5.4.1.2 Graphics Configuration
Use the Graphics Configuration menu ( BIOS Menu 22 ) to configure the graphics
settings.
Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc.
Chipset
Graphics Configuration
Primary Display [Auto]
Internal Graphics [Enabled]
DVMT Pre-Allocated [32M]
DVMT Total Gfx Mem [MAX]
Primary IGFX Boot Display [VBIOS Default]
Backlight Control [CCFL]
Select which of
Auto/IGFX/PCIE Graphics
device should be Primary
Display Or select SG for
Switchable Gfx.
---------------------

: Select Screen
↑ ↓
: Select Item
Enter Select
+ - Change Opt.
F1 General Help
F2 Previous Values
F3 Optimized Defaults
F4 Save & Exit
ESC Exit
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
BIOS Menu 22: Graphics Configuration

Primary Display [Auto]
Use the Primary Display option to select the graphics controller used as the primary boot
device. Configuration options are listed below:

Auto D
EFAULT

IGFX

PCI

Internal Graphics [Enabled]
Use the Internal Graphics option to enable or disable the internal graphics device.

Auto The internal graphics device is automatically detected
and enabled.

Disabled Disable the internal graphics device.