101-001 (iTDC), 101-002 (EIO88), 101-145 (iTDCSR) -60- Users Manual
IDTeck – iTDC 2~4 DOOR ACCESS CONTROLLER
OUTPUT TEST
Relay 1 test
(Activated two times)
<ENT>
Relay 2 test
(Activated two times)
Relay 3 test
(Activated two times)
Relay 4 test
(Activated two times)
TTL Output 1 test
(Activated two times)
Output test end
Enter any key
This test is applicable to
Relay3 and LED.
This test is applicable to
Relay4 and LED.
This test is applicable to
TTL1. (0V - 5V)
This test is applicable to
TTL2. (0V - 5V)
This test is applicable to
Buzzer.
Buzzer Output test
(Activated two times)
TTL Output 2 test
(Activated two times)
This test is applicable to
Relay1 and LED.
This test is applicable to
Relay2 and LED.
This test is applicable to
TTL3. (0V - 5V)
TTL Output 3 test
(Activated two times)
10.4.4 LCD TEST
10.4.5 KEYPAD TEST
Last Update
LCD TEST
0123456789ABC
KEYPAD TEST
☞
. Press <ENT> key to continue the test. LCD will display all
characters on the screen.
☞
. When the test is done. LCD will show “Last Update Press any
key…” then press any key to return to the set-up menu.
☞
. Press <ENT> key to start the keypad test.
☞
. LCD will display “0123456789ABCDEF” on the bottom line of
LCD. Press each key from the keypad then the depressed key will
be disappeared from the LCD. Note that F1 key is “A”, F2 key is
“B”, F3 key is “C”, F4 key is “D”, ESC key is “E” and ENT key is
“F” on the screen. After the test is done, it returns to set-up menu.
