101-001 (iTDC), 101-002 (EIO88), 101-145 (iTDCSR) -32- Users Manual
IDTeck – iTDC 2~4 DOOR ACCESS CONTROLLER
8. BASIC SETTINGS
Note !!!
You have to connect optional LCD display and Keypad to iTDC for the following manual settings.
8.1 INITIALIZATION OF iTDC
After the all installation and connections are completed, power up the iTDC then press the two
Initialisation Switches simultaneously. The LCD will first display “
System
Initialising…
” After the all
Initialisation process is completed then the LCD will display “
Initialise END Turn OFF Power.
” Turn the
power off then turn on again for iTDC running.
8.2 HOW TO ENTER THE SETUP MENU
To set-up or to change the iTDC settings, you have to enter the
SETUP MENU
first. To do so, press the
8
times <0>
key for
Master ID
(
Default setting “00000000”
) and
<ENT>
key from the optional Keypad
then you can get into
SETUP MENU
. There are 4 main
SETUP MENU
and you first get into
[SETUP
MENU F1]
. You can move to other
SETUP MENU
by pressing
<F1>
key for
[SETUP MENU F1]
,
<F2>
key for
[SETUP MENU F2]
,
<F3>
key for
[SETUP MENU F3]
and
<F4>
key for
[SETUP
MENU F4]
. There are several
SUB MENU
in the main
SETUP MENU
and you can scroll up and down
the
SUB MENU
by pressing
<4>
and
<6>
key in the main
SETUP MENU
. If you don’t press any key for
20 seconds or if you press
<ESC>
key then iTDC will exit the
SETUP MENU
then return to normal
operation. You can also change the
Master ID
in the
[SETUP MENU F2]
.
The
Master ID
for
iTDC-SR
is
10 times <0>
key (
Default setting “0000000000”
).
Initialize END
System
