101-001 (iTDC), 101-002 (EIO88), 101-145 (iTDCSR) -49- Users Manual
IDTeck – iTDC 2~4 DOOR ACCESS CONTROLLER
10.2.10
REGISTERING AND CHANGING TIME SCHEDULE
. Press <2> key or <8> key to adjust the Time Schedule (T/S)
number (1-15) and the day of the week (Mon-Sun and ‘HOL’).
Define which shift of the day (1-5), using the <4> key and <6>
key. ‘HOL’ refers to specific holidays you will register. Press
<ENT> key, and the cursor will blink, then enter the beginning
time of the period, in the form of hour (2-digit): minute (2-digit)
and the ending time in the same form. Then the lower line will
indicate the defined period. For more schedules, repeat the
process. To end time scheduling, press <ESC> key.
. Possible values for time scheduling
1) Time schedule number: 01 ~ 15 (Needed when IDs are registered)
2) A day of the week: MON, TUE, WED, THU, FRI, SAT, SUN, HOL
3) Index: 1 ~ 5(referred to the five periods of time of a day)
. You may program time schedules to grant and restrict access for
each user. There can be up to 15 different schedules. A minimum
of one schedule must be defined.
If only one schedule is programmed the most common setting
allows access for all users 24 hours / day. A time schedule can be
programmed for each day of the week and holidays, and five
shifts can be defined for each day. To set time schedules, press
<ENT> key from this menu.
If you want to set time schedules, press <ENT> key when this
figure is displayed.
TIME
T/S: 01 HOL #1
