101-001 (iTDC), 101-002 (EIO88), 101-145 (iTDCSR) -46- Users Manual
IDTeck – iTDC 2~4 DOOR ACCESS CONTROLLER
10.2.1 TIME SETTING
10.2.2 HOLIDAY INDEX SETTING
10.2.3 COMMUNICATION ID (ADDRESS) DISPLAY
10.2.4 BAUD RATE SETTING
TIME SETTING
YYYYMMDDhhmmssW
_ _ _ _ _ _ _ _ _ _
COMM ID
BAUD RATE
BAUD RATE
BAUD RATE
☞.
Press <ENT> key and enter 15 digit Date/Time codes then
<ENT> key to finish setting.
YYYY: Year, MM: Month, DD: Date
hh: Hours (24 hours system), mm: Minutes, ss: Seconds
W: Sun=1, Mon=2, Tue=3, Wed=4, Thu=5, Fri=6, Sat=7
Example: 200302101330152 => Feb.10,2003 13:30:15 Mon
☞
. This menu shows the current communication ID of the iTDC. If
multiple iTDC units are connected to one host PC, each unit
must be configured to different communication ID.
Note:
You can change COMM ID by DIPswitch setting of the iTDC.
☞
. iTDC supports 4800, 9600, 19200 and 38400bps of baud rate and
default setting are 9600bps. Wrong baud rate setting will cause
communication errors and you have to set same baud rate to
iTDC and host PC. If you have communication problem,
please check followings;
- Check COMM ID of iTDC and host PC
- Check BAUD RATE of iTDC and host PC
- Check communication port and cable
- Check COM port set-up of host PC
Parity: None, Data Bit: 8 bit, Stop Bit: 1 bit
To change the baud rate, press <ENT> key and select desired
baud rate by pressing <4> or <6> key then press <ENT> key.
☞
. Holiday Index is to link the Holiday Schedule (H/S) to Time
Schedule. You can set-up one of holiday index (01~10) to one of
T/S index (01~15) so that the Holiday Time Code in the T/S can
be applied for the Holidays in the H/S. Default HOLIDAY
CODE is ‘00’ which means no holidays are applied to T/S.
Select HOLIDAY INDEX menu and press <ENT> then select
desired T/S_INDEX (01~15) by pressing <4> or <6> key then
press <ENT> key to input 2 digit HOLIDAY CODE and <ENT>.
T/S_INDEX 01
HOLIDAY
