101-001 (iTDC), 101-002 (EIO88), 101-145 (iTDCSR) -36- Users Manual
IDTeck – iTDC 2~4 DOOR ACCESS CONTROLLER
8.6 ID REGISTRATION
You can register the User ID into the iTDC. Select
[SETUP MENU F3]
->
[ID REGISTRATION]
then
follow the steps below.
The
Master ID
for
iTDC-SR
is
10 digits
number (
Default setting “0000000000”
).
1. ID [________]: ID number consists of 3-digits Facility code from 000 to 255 and 5-digits ID number
from 00000 to 65535 so that the 8-digits ID number cannot exceed 25565535. If you don’t know the ID
number of the proximity cards then select
[SETUP MENU F4]
->
[READER
TEST]
then present the
card to the reader to display the ID number. Enter 8-digits ID number then press <ENT> key in the ID
[________] field. (ID number of iTDC-SR has 10-digits decimal numbers.)
2. PW [____]: PW is the password which can be used to access the doors where you install a Proximity
and Keypad Reader and set-up the RF + Password operating mode. But regardless of the operating mode,
it is necessary to enter a default password (0000) in the PW [____] field when you register ID.
3. TA__TB__TC__TD__: TA, TB, TC and TD are Time Schedule code (00-15) for the Readers, TA is the
Time Schedule for the Reader #1, TB is for Reader #2, TC is for Reader #3 and TD is for Reader #4.
When you present the card to Reader #1 then the cardholder is only allowed the access of the door during
the Time Schedule code entered to TA__ and the other Readers are the same manner. To control the
accessible Time Schedule for each cardholder, you must set-up the Time schedules first and enter the
Time Schedule code here. If you want to access the door anytime for the cardholder then enter default
Time Schedule code '00' for the value.
ID (8digits) + <ENT>
Password (4digits) + <ENT>
TA00TB00TC00T
TA__TB__TC__T
ID
<ENT>
ID [________]
Time Schedule codes + <ENT>
Reader Usage codes + <ENT>
Reg. completed
Initial LCD Display
STAR iTDC [F1]
Press <F3> then
Select
[
ID REGISTRATION]
8 times <0> + <ENT>
“MASTER ID” + <ENT>
