101-001 (iTDC), 101-002 (EIO88), 101-145 (iTDCSR) -59- Users Manual
IDTeck – iTDC 2~4 DOOR ACCESS CONTROLLER
10.4.1 VERSION CHECK
10.4.2 SRAM TEST
10.4.3 OUTPUTS TEST
RAM test pass!!!
Memory fail!! 00
SRAM TEST
☞
. To test the SRAM memory, press <ENT> key.
☞
. If the SRAM has problems, LCD will show the memory block
number with Memory fail message. In this case, you have to
contact technical support. Press any key to return to the set-up
menu
☞
. If the SRAM is working properly then LCD will show RAM test
pass message. Press any key to return to the set-up menu.
VERSION
☞
. The version of the controller’s firmware is displayed on the LCD.
Press <4> or <6> key to look for other menus of set-up menu F4.
OUTPUT 8
OUTPUT
☞
. To test the outputs, press <ENT> key.
☞
.
The output test will be proceeding for each output twice On and
Off. The first 4 test is for output relays (Realy#1~Relay#4) so
you can hear the mechanical sound of relays and followed 3 test
is for TTL output test. The last test is for built-in buzzer test and
you can hear two beep sounds. Press any key to return to the set-
up menu.
