50
IDS X-Series Training v2.7
Location 243: View Keypad ID
To view a keypad ID, enter this location from the physical keypad that you want to know the ID.
Note: This is only for viewing the keypad ID. The Keypad ID is set when you enrol the keypad and
cannot be changed in this location.
Location 251 to 258: Keypad Options
Location Type: Bitmap
Each keypad can be set with the following options:
Option
Default
Action
Description
1
ON
Keypad Timeout
If a keypad is made global, i.e. The keypad will be able to view
other partitions on the system. This option will automatically return
the keypad to its home partition which was programmed into
location 240.
2
OFF
Keypad Sleep Mode
If this is enabled, the keypad will switch all its LEDs off after the
time programmed into location 22. Press any key to wake it up.
3
OFF
Global Keypad Status
If this is enabled the keypad can view any partition on the system.
This option ties in with option 1.
4
OFF
Show All Zones
If the keypad is set to global this option determines if the user sees
all zones, or only the zones that belong to the partition.
5
OFF
Partition Menu
Shows all partitions if any of the following keys are pressed: 1-
Quick Arm Key, 5-Stay Arm Key, 6-Stay and Go Key.
6
OFF
Stay Menu
This option will ask for a profile number when the stay key, [5] is
pressed to arm in the stay profile.
7
OFF
Buzzer Follows Siren
Enable this option if you want the keypad buzzer to sound when
the siren sounds.
8
OFF
Global Chime
If the keypad is set to global this option will chime for chime zones
in all partitions.
Exercise:
Configure keypad 1, to be a global keypad with the partition menu active.
Instructions
Key presses
Enter the location for keypad 1
[2][5][1] [*]
Option 3 must be enabled
[3] [*]
Enable partition menu
[5] [*]
Exit the location
[#]
