MSD-501/502/701/702 User
’s Guide
69
7.12.1 IP address/subnet mask/gate way address
Menu IP address: Top
→
LAN
→
IP ADDRESS
Subnet mask: Top
→
LAN
→
SUBNET MASK
Gateway address: Top
→
LAN
→
GATEWAY ADDRESS
Setting value [Default]: IP address: 192.168.1.199
Subnet mask: 255.255.255.0
Gateway address: 192.168.1.200
You can set IP address, subnet mask, and gateway address.
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
7.12.2 Operation mode
Menu Top
→
LAN
→
FUNCTION
Setting for Each connection
Setting value
Setting
Operation mode
Receiver mode
Transmitter mode
Operation mode
RECEIVER [Default]
TRANSMITTER
Destination IP address
Not necessary
0.0.0.0 to 255.255.255.255
[Default] 192.168.1.198
PJLink protocol connection
Not necessary
ON: Use
OFF: Not use [Default]
Destination connection port
number
*1
Not necessary
1 to 65535 [Default]: 1100
PJLink protocol password
*2
Not necessary
20,30 to 39 in ASCII code (in hex)
41 to 5A, 61 to 7A [Default]: 20 (space)
*
1
: If selecting
“ON” for PJLink protocol, the target port number is fixed at “4352”.
*2
: Up to 32 characters. If you do not want the password authentication, you do not need to set the item.
You can s
et the LAN operation mode consisting of “RECEIVER” mode that controls the MSD externally and
“TRANSMITTER” mode that controls peripheral devices from the MSD.
If you select
“TRANSMITTER” mode, you need to set the information of connecting device.
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
