MSD-501/502/701/702 User
’s Guide
35
7.4.4 Aspect ratio control
Menu
Top
→
OUTPUT TIMING
→
ASPECT PROCESS
Setting for
Each input/input signal
Setting value L-BOX/S-PANEL : letter box/side panel [Default]
S-CUT/TB-CUT : Side cut/top bottom cut
Input signal
16:9 input video is output to
a 4:3 sink device.
L-BOX/S-PANEL
Letter box
S-CUT/TB-CUT
Side panel
Output signal
4:3 input video is output to a
16:9 sink device.
Side cut
Top/bottom cut
[Fig. 7.4] Restoring aspect ratio
7.4.5 Overscan
Menu Top
→
OUTPUT TIMING
→
INPUT OVER SCAN
Setting for Each input/input signal
Setting value 100% to 115%
[Default] NTSC / PAL / SDTV: 105%; HDTV / PC: 100%
You can set enlarged display of input video.
7.4.6 Display position
Menu
Top
→
OUTPUT TIMING
→
INPUT POSITION (Input side) / OUTPUT POSITION (Output side)
Setting for Input side : each input/input signal
Output side
: each output (COMMON TO OUTA AND OUTB)
Setting value
Input side:
Horizontal position (
－
Horizontal input size to
＋
Horizontal output resolution [Default] 0)
Vertical position (
－
Vertical input size
to
＋
Vertical output resolution
[Default] 0)
Output side:
Horizontal position (
－
Horizontal output size to
＋
Horizontal output resolution [Default] 0)
Vertical position (
－
Vertical output size
to
＋
Vertical output resolution
[Default] 0)
You can set the position where input video is displayed.
Note:
If the resolutions of each output are not the same, the resolution of OUT1 will be the standard.
