IDEC WB1F Series, User Manual

Page: 48 / 116

2. Installation & wiring Function 4. Support tool 5. Appendix 1. Overview
3-25
Slave mode
To stop barcode reading can be done with the following five commands, including the original command.
z
Original command:
^stop CR LF
z
Alias 0: STX STOP ETX
z
Alias 1: off CR
z
Alias 2:
ESC CANCEL CR LF
z
Alias 3:
halt
You can change the "start barcode reading" and "stop barcode reading" control commands to those in the
command system of the system or host device already in operation.
The aliases can be configured as any desired string.
The following may not be sent or received correctly.
• strings that are the same as communication commands that already exist.
• strings that are partial matches of other strings.
• extremely short strings.
etc.
First confirm operation and register the appropriate strings.