IDEC WB1F Series, User Manual

Page: 60 / 116

2. Installation & wiring Function 4. Support tool 5. Appendix 1. Overview
3-37
Configuration item table
Item Sub item
Address
(hex)
Size
(dec)
Default
(hex)
Setting value
(hex)
Remarks
OK/NG output
settings
OK output/reading
linked control
0120 1 01
00: Disabled
01: Enabled
Enable to link to the reading
operation.
Reserved 0121 1 - -
OK output
polarity
0122 1 01
00: Off
01: On
On: The transistor is turned on
and current flows.
Off: The transistor is turned off
and the circuit is open.
When the setting value is changed,
it is immediately reflected in the
OK output.
OK output
duration
0123 1 0A
00: Infinity
01-FF: Setting value by 10ms step
(10 ms to 2,550 ms)
NG output/reading
linked control
0124 1 01
00: Disabled
01: Enabled
Enable to link to the reading
operation.
Reserved 0125 1 - -
OK/NG output
settings
NG output
polarity
0126 1 01
00: Off
01: On
On: The transistor is turned on
and current flows.
Off: The transistor is turned off
and the circuit is open.
When the setting value is changed,
it is immediately reflected in the
NG output.
NG output
duration
0127 1 0A
00: Infinity
01-FF:Setting value by 10ms step
(10 ms to 2,550 ms)
Reserved 0128-012F 8 - -
External trigger
input settings
Reading start with
External trigger input
0130 1 01
00: Disabled
01: Enabled
Enable when you want to
perform reading with an external
trigger input operation.
External trigger input
active level
0131 1 01
00: High
01: Low
External Trigger
input filter time
0132 1 20 01-20 (1ms to 32ms)
Start reading barcode by turn-
ing external trigger input on for
longer than the setting value.
To shorten the setting value
may affect noise resistance, so
fully evaluate this when using
product.
Reserved 0133-013F 13 - -
PWM output
settings
PWM output reading
linked control when
successful
0140 1 01
00: Disabled
01: Enabled
Enable to link to the reading
operation.
Reserved 0141 1 - -
PWM output
frequency when
successful 0142
2
D0
0014-4E20: Setting value Hz
(20 Hz to 20,000 Hz)
Lower byte setting
0143 07 Upper byte setting
PWM output
duration
when successful
0144 1 14
00: Infinity
01-FF: Setting value by 10ms step
(10 ms to 2,550 ms)
Open state when the output stops.
PWM output duty
when successful
0145 1 32
01-63: Setting value %
(1% to 99%)
Set the percentage when on.
Reserved 0146 1 - -
Reserved 0147 1 - -
PWM output reading
linked control when
failed
0148 1 01
00: Disabled
01: Enabled
Reserved 0149 1 - -