IDEC WB1F Series, User Manual

Page: 86 / 116

5-1
5
Appendix
This chapter describes WB1F specifications, troubleshooting, and contains lists of codes.
5. 1 Product specifications
RS-232 Type USB Type
Model WB1F-100S1B WB1F-100S1S
Rated power supply voltage 5V DC ±0.25 V
*3
USB bus power (5V DC)
Consumption current 200 mA or lower (peak 350 mA or lower)
Operation button Equipped on unit (tactile switch) x 1
Reading distance 35±10 mm
*1
Reading width 80 mm (reading distance 35 mm)
*1
Number of digits to be read 64 digits max
PCS 0.45 or higher (White reflectance 75% or higher)
*2
Minimum resolution 0.127 mm
Light source Red LED (λp=630 nm)
Reading method Linear CCD image sensor (2,500 pixels)
Reading confirmation OK output, NG output, PWM output, indicator LED x 3
Number of scans 500 scans/second
Communication interface RS-232 (600 to 115,200 bps) USB 2.0 full-speed 12 Mbps (virtual COM)
Connection type
Loose wires+shield
1 m, 10CxAWG30 shielded cable USB connector Type A
1 m, 2PxAWG28 shielded cable
External trigger input
1 circuit
Non-voltage contact (L active)
Voltage input (VIL: 0V-1.0V, VIH: 4.0 V-VCC)
None
OK output, NG output
PWM output
1 circuit each (3 circuits total)
Open collector (sink)
Maximum rating 26.4 V, 100 mA
None
Dielectric strength 500 VAC (live part-dead part, 1 minute)
Anti-ESD Contact ±6 kV, air ±8 kV (IEC 61000-4-2)
Ambient usage temperature 0 to 40°C (no freezing)
Ambient usage humidity 30 to 85%RH (no condensation)
Ambient usage illumination 5,000 lx or lower (under incandescent light)
Ambient storage temperature -20 to +60°C (no freezing)
Weight
Approx. 50 g (in packaging: approx. 100 g)
Protective construction IP40
Certified standards
UL/c-UL Recognized
*3
UL/c-UL Listing
CE mark (EMC directive self-declared), VCCI (compliance confirmed), FCC (Verification),
ICES-003 Class B (self-declared)
Codes to be read
EAN-13/8 (including addon), UPC-A/E/E1 (including addon), Code39,
Codabar (=NW7), Interleaved 2of5 (=ITF), Standard 2of5 (=Industrial 2of5),
Matrix 2of5, IATA 2of5, Chinese Post Matrix, COOP 2of5, SCODE, Code93, Code128,
GS1-128 (formerly: EAN-128), MSI/Plessey, Italian Pharmacy (Code32), CIP39,
Tri-Optic, TELEPEN, Code11, GS1 Databar (formerly: RSS)
*4
*1 By IDEC standard barcode (symbol: EAN-13, resolution: 0.33 mm, PCS: 0.9)
*2 By IDEC standard barcode (symbol: EAN-13, resolution: 0.33 mm)
*3 If you use the WB1F as UL Recognized product, you shall use a limited source or class 2 power source as a power supply.
*4 Omni-directional, Truncated, Limited, Expanded