IDEC KW2D Series User Manual Download Page 102

Page: 102 / 129

2 Configuration and Functions

6-6

KW2D Series Smart RFID Reader User’s Manual

"EtherNet/IP Adapter" is selected

No.

Communication Mode

Port No.

Description

EtherNet/IP Adapter

2222/44818

The role of communication varies based on the

Port No.

2222:

This is a cyclic (Class1) communication that reads the

UID information of RFID tags and the authority

information obtained as a result of verification. If

communication is lost for 10 seconds or more, the red

LED of the KW2D Series Smart RFID Reader will flash.

44818: This is a response/request (Class3) communication in

which the service requested from the host device

(originator) is executed by the target (adapter) device.

Unused

Do not use this port.

ModbusTCP Server

(Maintenance)

504

It is used to monitor the status of the KW2D Series Smart RFID

Reader on another host device.

To restrict access to the KW2D Series Smart RFID Reader, select

the

Restrict

check box, and then enter the IP address from which

access is allowed in the

Allow Access by IP Address

field.

Event Transmission(TCP)

The KW2D Series Smart RFID Reader operates as a client and

performs TCP communication with the host device as a server.

Click

Setting

to display the

Event Transmission(TCP)

dialog

box. For details, refer to " Event Transmission(TCP) Dialog Box" on

page 6-8.

Event Transmission(UDP)

Performs UDP communication with the host device without a

connection.

Click

Setting

to display the

Event Transmission(UDP)

dialog

box. For details, refer to "Event Transmission(UDP) Dialog Box" on

page 6-10.

Maintenance

Communication Server

2101

Use this port to communicate with the KW RFID Configurator.

Unused

Do not use this port.

Maintenance

Communication Server

2102

Use this port to communicate with the KW RFID Configurator.

Summary of Contents for KW2D Series


































































































































Search results

Summary of Contents for KW2D Series

Reviews:

Related manuals for KW2D Series

Brands by name

Popular brands

IDEC KW2D Series, User Manual

Search results

Summary of Contents for KW2D Series

Reviews:

Related manuals for KW2D Series

Brands by name

Popular brands