IDEC KW2D Series User Manual Download Page 101

Page: 101 / 129

2 Configuration and Functions

KW2D Series Smart RFID Reader User’s Manual

6-5

FID

fig

ura

■

Connection Settings

Sets the connections to use for the KW2D Series Smart RFID Reader. Select "ModbusTCP Server", "EtherNet/IP

Adapter", "CC-Link IE Field Basic Slave", "Event Transmission(TCP)", "Event Transmission(UDP)", "Unused(For Demo)",

"ModbusTCP Server(Maintenance)", "Maintenance Communication Server" or "Unused" from the Communication

Mode. The default is "ModbusTCP Server".

"ModbusTCP Server" is selected

No.

Communication Mode Port No.

Description

ModbusTCP Server

502

This is the communication mode for reading the tag information of RFID

tags. If the communication is lost for 10 seconds or longer, the red LEDs

on the KW2D Series Smart RFID Reader flash.

To restrict access to the KW2D Series Smart RFID Reader, select the

Restrict

check box, and then enter the IP address from which access is

allowed in the

Allow Access by IP Address

field.

ModbusTCP Server

(Maintenance)

503

This is used to monitor the status of the KW2D Series Smart RFID Reader

on another host device.

To restrict access to the KW2D Series Smart RFID Reader, select the

Restrict

check box, and then enter the IP address of the device to which

access is allowed in the

Allow Access by IP Address

field.

Unused

Do not use this port.

ModbusTCP Server

(Maintenance)

504

This is used to monitor the status of the KW2D Series Smart RFID Reader

on another host device.

To restrict access to the KW2D Series Smart RFID Reader, select the

Restrict

check box, and then enter the IP address of the device which is

allowed to access in the

Allow Access by IP Address

field.

Event Transmission(TCP)

The KW2D Series Smart RFID Reader operates as a client and performs

TCP communication with the host device operating as a server.

Click

Setting

to display the

Event Transmission(TCP)

dialog box. For

details, refer to " Event Transmission(TCP) Dialog Box" on page 6-8.

Event Transmission(UDP)

Performs UDP communication with the host device without a connection.

Click

Setting

to display the

Event Transmission(UDP)

dialog box. For

details, refer to "Event Transmission(UDP) Dialog Box" on page 6-10.

Maintenance

Communication Server

2101

Use this port to communicate with the KW RFID Configurator.

Unused

Do not use this port.

Maintenance

Communication Server

2102

Use this port to communicate with the KW RFID Configurator.

Summary of Contents for KW2D Series


































































































































Search results

Summary of Contents for KW2D Series

Reviews:

Related manuals for KW2D Series

Brands by name

Popular brands

IDEC KW2D Series, User Manual

Search results

Summary of Contents for KW2D Series

Reviews:

Related manuals for KW2D Series

Brands by name

Popular brands