IDEC KW2D Series User Manual Download Page 68

Page: 68 / 129

5 Maintenance Communication (Server)

4-26

KW2D Series Smart RFID Reader User’s Manual

5.2 Functions

●

Download and Upload project

You can download the project created by KW RFID Configurator to the KW2D Smart RFID Reader and upload the

project from the KW2D Smart RFID Reader. The project in the KW2D Smart RFID Reader can be protected with

download and upload passwords.

•

Downloading a Project (



page 6-17)

•

Uploading a Project (



page 6-21)

●

Download tag list only

Only the tag list can be downloaded to the KW2D Smart RFID Reader. For details, refer to Chapter 6 "Download only

the tag list of the project" on page 6-20.

●

Monitor UID Information Detected by KW2D Series Smart RFID Reader

You can monitor the tag information detected by a KW2D Series Smart RFID Reader. You can also add the monitored

UID information to the tag list. For details, refer to Chapter 6 "RFID Reader List Dialog Box" on page 6-19.

●

Search KW2D Series Smart RFID Readers

The search function of KW RFID Configurator can detect the IP addresses of KW2D Series Smart RFID Readers. For

details, refer to Chapter 6 "RFID Reader List Dialog Box" on page 6-19.

●

Update KW2D Series Smart RFID Reader System Software

You can update the System Software on a KW2D Series Smart RFID Reader. Always using the KW2D Series Smart

RFID Reader with the latest System Software is recommended. For details, refer to Chapter 6 "RFID Reader List Dialog

Box" on page 6-19.

Summary of Contents for KW2D Series


































































































































Search results

Summary of Contents for KW2D Series

Reviews:

Related manuals for KW2D Series

Brands by name

Popular brands

IDEC KW2D Series, User Manual

Search results

Summary of Contents for KW2D Series

Reviews:

Related manuals for KW2D Series

Brands by name

Popular brands