2 KW2D Series Smart RFID Reader Functions
KW2D Series Smart RFID Reader User’s Manual
5-17
5
Fu
nc
tio
ns
a
nd
S
ettin
gs
2.3 Edit the tag list
The tag list registered in the KW2D Smart RFID Reader can be edited by using the master tag or by operating the
shared memory from the host device.
●
Use master tags
You can enable or disable the RFID tags registered in the tag list, and register the read RFID tags in the tag list with
the registration master tag or deletion master tag prepared in advance. For the master tags, refer to Chapter 6 "Master
Enable or register RFID tags
Enables RFID tags that are registered in the tag list and whose Enable/Disable is "Disabled".
For RFID tags that are not registered in the tag list, registers the UID of the read tag.
■
Operating Procedure
1
Hold the registration master tag over the KW2D Smart RFID Reader.
The KW2D Smart RFID Reader shifts in "tag edit mode (registering)".
When the Protect check box in the tag list is cleared, you can edit the tag list even if the project is password
protected.
The processing of the KW2D Smart RFID Reader and tag list varies based on the operation performed in "tag
edit mode (registering)" or "tag editing mode (deletion)".
•
Download project or tag list
Discards the tag list being edited and shifts to "operation mode (running)". After downloading, it works with
the downloaded tag list.
•
Upload project
Keeps the tag list being edited in "tag edit mode". However, the uploaded tag list is the one before editing.
Buzzer
LED
Status
None
The LEDs (green) are ON and the LEDs (white)
flash rapidly. (100 ms interval)
Waiting to read the tag to enable or register.
Running
The LEDs (white) flash slowly.
Registering
The LEDs (green) are ON and the LEDs (white) flash rapidly.
LED (white)
LED (white)
LED (white)
LED (white)
LED (white)
LED (white)
LED (green)
LED (green)
