2 How to install and remove
KW2D Series Smart RFID Reader User’s Manual
3-3
3
In
sta
lla
tio
n a
nd
W
irin
g
●
How to install
1
Align the TOP marks on the front unit and the back unit, and then insert the back unit into the front unit.
2
Confirm that the back unit is inserted fully into the front unit, and then while pressing the locking lever (1) on the
back unit, push it in the direction indicated by "LOCK
" (2).
This completes attaching the back unit to the front unit.
You cannot insert the back unit into the front unit if the locking lever is in the locked position ("LOCK
").
Always confirm that the locking lever is in the unlocked position (opposite direction of "LOCK
").
•
Confirm that the locking lever is on the other side of the protrusion. The lock is not fully engaged if the
locking lever is not in the lock position ("LOCk
")
on the other side of the protrusion.
•
After attaching , confirm that the back unit does not come off.
Front of back unit
TOP mark
TOP mark
Locking lever
Caution
(2)
Protrusion
(1)
Locking lever
(2)
Caution
