4 Online
6-18
KW2D Series Smart RFID Reader User’s Manual
•
If the system software versions between KW2D Series Smart RFID Reader and KW RFID Configurator are
different, a confirmation message will be displayed.
- Click
Yes
to update the system software of the KW2D Series Smart RFID Reader and download the project.
- Click
No
to stop updating the system software of the KW2D Series Smart RFID Reader and downloading
the project.
- Click
Cancel
to stop updating the system software of the KW2D Series Smart RFID Reader, and return to
the KW RFID Configurator.
•
If a download password was set for the KW2D Series Smart RFID Reader project, the
Confirm Password
dialog box is displayed. Enter the password and click the
OK
button. The download will start only if the
password matches. For the download password, refer to "Password Settings" on page 6-12.
•
If the IP address of the KW2D Series Smart RFID Reader connected by the Ethernet cable is not in the same
subnet as the computer running KW RFID Configurator, you must set an IP address in the same subnet for
the computer. The KW RFID Configurator has a function to add an IP address in the same subnet as the
KW2D Series Smart RFID Reader to the computer.
Click
Yes
in the following confirmation message for adding an IP address. The confirmation message for
changes to the device is displayed.
Click
Yes
in the following device change confirmation message. The IP address will be added to this
computer.
