TUNNEL MASTER JR MANUAL
Wash Configuration
57
Output Lists
Procedures
Follow these procedures to set or change the Outputs that will be activated
for the various service options.
Step Action
Screen
Displays
1
Press the [MENU] button
from the main screen display
[1] Shift Break [4] View Counts
[2] Wet Down Wash [5] Print Reports
[3] Configure Wash
2
Press the numeric key “4” to
select the
Configure Wash
menu option.
[1] Service [4] Wash Settings
[2] Outputs [5] Set Date Time
[3] Output Lists [6] Set Password
3
Press the numeric key “3” to
select the
Output Lists
menu option.
Service _ _
Outputs , , , , , , ,
, , , , , , ;
4
Using the numeric keypad
enter the PLU# of the
service to be programmed.
Service 03
Outputs , , , , , , ,
, , , , , , ;
5
Press the “ENT” button on
the display pad to advance
to the next setting.
Service 03
Outputs _ _, , , , , , ,
, , , , , , ;
6
Using the numeric buttons
enter in the number
corresponding to the
Selective or Deselective
output the user wishes to
have activated when this
service is processed.
Service 03
Outputs 05, , , , , , ,
, , , , , , ;
7
Press the “ENT” button on
the display pad to advance
to the next setting.
Service 03
Outputs 05, _ _ , , , , , ,
, , , , , , ;
8
Repeat steps 6 & 7 until all
desired outputs have been
programmed.
Service 03
Outputs 05, 06 , , , , , ,
, , , , , , ;