TUNNEL MASTER JR MANUAL
Wash Configuration
52
Services
Introduction
The Services menu option is where the user will initially setup and edit the
wash services that will be available on the system. The basic controller
configuration allows for up to 16 services and the roller control as the 17
th
.
There is an option to add an additional entrance Keypad that will provide
for an additional 16 services for a total maximum of 32 services.
YOU
MAY NOT MAKE CHANGES TO THE SERVICES WHILE IN A
SHIFT. THE CAR COUNT MUST BE 0. YOU MAY BUMP A
SHIFT AT THE KEYPAD OR THE RELAY BOX. (SEE PAGE 62)
Menu Items
Function
The following is a list of menu items within the Services menu and a brief
explanation of their function.
Menu Item
Function
Service
Enter a numeric value of 01 up to 16. These numbers
represent the wash services options that will be available
and their location on the Entrance Keypad. The numbers
represent a PLU # or Price Look Up for the system to refer
to when displaying and printing reports.
Name
Use the numeric keys to enter the name of the service to be
programmed.
Price
Use the numeric keys to enter the price for the service
being programmed.
Note: To enter a decimal point press the “0” button two
times.
Type
Use the “0” button to advance to the desired type of
service.
B
=Basic: The service will include all mandatory
outputs be activated for when sold.
E
=Extra Service: Those services which are sold as add-ons
to a basic wash service, i.e., Polish Waxes
