TUNNEL MASTER JR MANUAL
Operating Procedures
69
Printing Reports
Picture
This is a picture of a shift report and an explanation of the entries. The
summary reports provide the same basic information.
Date / Time and station ID information. ID
information is setup in the Headers menu option
in Wash Settings.
Shift
Start
and
Stop
times captured from the
date time settings in the controller.
Service, Qty and Amount
are the names of
services processed during the shift, the quantity
or number of the services processed and the
dollar value of the quantity of the service times
the selling price.
Non Tax Sales
= total sales that were non
taxable
Sales @ Tax Rate 1 & 2
= Total sales of all
services setup as having tax rates 1 or 2 applied
to them
Sales @ Combined Tax Rate =
Total sales of
all services setup as having both tax rates
applied
Taxes @ Rate 1 & 2 =
The actual taxes in $,
paid for the services sold that were at the set tax
Car Count =
Total services setup as base
washes that were processed.
Invalid Count =
The number of times that
Minimum Car Length was not achieved
Violation Count =
The number of times that the
gate switch was continuously activated that
exceeded Maximum Car Length.
Override Activity
displays the Outputs and
number of times the output was activated in the
following manners.
Auto =
The number of time the system
automatically activated the output to process a
vehicle.
Manual =
The number of time the relay toggle
switch was manually turned on to activate an
output.
Time =
Is the total number of seconds the
manual switch was turned on while it was
manually activated.
