TUNNEL MASTER JR MANUAL
System Hardware
28
The Entrance Keypad Dip Switch Settings
Dip Switch Settings
The following picture and table will show the Entrance Keypad
Dip switch and the various settings that may be used.
Helpful Tips
☺
For location of the Dipswitch refer to the previous Entrance
Keypad picture on page 23. The “OFF” position is toward the
word “Config” on the circuit board.
The following picture shows the Keypad lid Dipswitch.
Entrance Keypad
Dip Switch
Switch Normal
Setting/Function
These are the dipswitch settings for normal operations.
Switch Setting
Function
1 OFF
Address
setting:
2 OFF
Address
setting
1, 2 OFF
1 OFF, 2 ON
1 ON, 2 OFF
1, 2 ON
= Address 5
= Address 6
= Address 7
= Address 8
3
OFF
Baud Rate
OFF = 9600
ON = 38,400
4 OFF
Test
Mode
