ICS SB686P Series, Product Manual

Page: 81 / 126

Manual Number: 40110-005-2 Page 71
Chapter 6: PCI/Plug and Play Setup
When you select PCI/Plug and Play Setup from the AMIBIOS Setup Main Menu, the following
Setup screen displays:
AMIBIOS SETUP - PCI / PLUG AND PLAY SETUP
(C)1996 American Megatrends, Inc. All Rights Reserved
Plug and Play Aware O/S No Available Options:
PCI Latency Timer (PCI Clocks) 64 No
PCI VGA Palette Snoop Disabled Yes
PCI IDE BusMaster Disabled
OffBoard PCI IDE Card Auto
OffBoard PCI IDE Primary IRQ Disabled
OffBoard PCI IDE Secondary IRQ Disabled
DMA Channel 0 PnP
DMA Channel 1 PnP
DMA Channel 3 PnP
DMA Channel 5 PnP
DMA Channel 6 PnP
DMA Channel 7 PnP
IRQ5 PCI/PnP
IRQ9 PCI/PnP
IRQ10 PCI/PnP
IRQ11 PCI/PnP
IRQ15 PCI/PnP
Reserved Memory Size Disabled
Reserved Memory Address C8000 ESC: Exit
↓↑
: Sel
On Board SCSI Enabled PgUp/PgDn: Modify
On Board VGA Enabled F2/F3: Color
The PCI / Plug and Play Setup Screen
When you display the PCI / Plug and Play Setup screen, the format is similar to the sample shown
above, except the screen displays only twenty options at a time. If you need to change other
options, use the down arrow key to locate the appropriate option. The available values for each
option are displayed on the right side of the screen when you tab or arrow into the field. If values
display for all parameters, the Setup parameters have been defined previously.
Note: The values on this screen do not necessarily reflect the values appropriate for your proces-
sor board. Refer to the explanations below for specific instructions about entering correct
information.