ICS SB686P Series, Product Manual

Page: 114 / 126

Manual Number: 40110-005-2 Page 104
To Turn On/Off Resolution-Change-on-the-Fly Support
To turn the resolution-change-on-the-fly support on or off, the following changes need to be made
to the WINMODE.INI file.
To turn on resolution-change-on-the-fly support, locate the following line in the WINMODE.INI
file and change the last word in the line to ‘on’:
system.ini,CL_WinAccel,changeres:lin=$winmode.ini, Configuration,changeres,on
To turn off resolution-change-on-the-fly support, locate the following line in the WINMODE.INI
file and change the last word in the line to ‘off’:
system.ini,CL_WinAccel,changeres:lin=$winmode.ini, Configuration,changres,off
Windows NT 3.1
Windows NT 3.1 Display Drivers Installation
1. Start Windows NT.
2. From the Main window of the Program Manager run the Windows NT Setup program.
3. Select Change Systems Settings from the Options menu of Setup.
4. Click on the down arrow at the right side of the DISPLAY: line. Scroll to the end of the list of
available display drivers and select Other display (requires a disk from the hardware
manufacturer).
5. Insert the Windows NT display driver diskette into drive A: and type: A:\ as the pathname, then
click on OK.
6. The list of available drivers, their associated resolution and monitor refresh rates is displayed.
7. Highlight by moving the cursor to the desired display driver, click on OK, and then click on
Close.
8. Continue with the remainder of the setup procedure. The changes do not take effect until the
computer is restarted.
9. After you have installed the Windows NT driver, to select another display resolution, follow
steps 2 and 3 above, then click on the down arrow on the right side of the DISPLAY: line to
select the desired resolution from the list of available display drivers.
Note: These Windows NT drivers only support systems or video adapters with 1MB of DRAM or
more.
Windows NT 3.5
The following steps describe how to install Windows NT 3.5 display drivers:
1. Select Control Panel from the Main group.
2. Select the Display icon.
3. Select Change Display Type.
4. Select Change from the Adapter Type area.