Manual Number: 40110-005-2
Page 103
Help
For help on WinMode, select the Help button. The main help screen contains an image of the
WinMode screen. Place the cursor over the field(s) for which you need help. Click the mouse to
display the help text for that field. Click again to make the pop-up text disappear.
After the extended resolution drivers and utilities have been installed, they can be reconfigured
either from within the Windows 3.X Control Panel or from the DOS prompt.
Reconfiguring Windows 3.X
If you are in Windows, run WinMode to reconfigure the Windows 3.X drivers. Please refer to the
WinMode section earlier in this appendix for information on WinMode.
If you are in DOS, proceed as follows to reconfigure the Windows 3.X
drivers:
1. Ensure that Windows 3.X and the extended resolution drivers are already installed on your
computer.
2. From your Windows directory, at the DOS prompt, type the following to run the Windows
SETUP.EXE program:
CD\WINDOWS <Enter>
SETUP <Enter>
Follow the instructions on the screen. When you come to the screen which lists the hardware and
software components such as display adapter (e.g. VGA, CGA, etc.), keyboard type, mouse type,
etc., go to the Display selection by using cursor keys to move the highlighted bar and press <En-
ter>.
3. The list of drivers and their associated resolutions displays.
4. Highlight your selection by moving the cursor to the correct display driver, and then press
<Enter>.
5. Setup prompts you that the driver is already in your Windows directory and gives you a chance
to replace it. Use the existing driver.
6. Continue with the remainder of the setup procedure.
To Turn On/Off DDC Detection Support
To turn the DDC detection support on or off, the following changes must be made to the
WINMODE.INI file.
To turn on DDC detection support:
MakeDdcCall=on
To turn off DDC detection support:
MakeDdcCall=off
Summary of Contents for SB686P Series
