5. Setting up the device
21
Menu level
Parameterisation level
Input variable of process value,
:
Default:
This parameter controls the device via the analog input signals
=
repectively
or via the digital signals of the interface
= RS232/RS485
(Modbus protocol). Confirm the selction with
[P]
and the device changes back into
menu level.
Back to menu group level,
With
[P]
the selection is confirmed and the device changes into menu group level
.
5.4.2. General device parameters
Menu level
Parameterisation level
Display time,
Default:
The display is set up with
[
▲
] [
▼
]
. Thereby on switches until 1 second in 0.1
steps and until 10.0 seconds in 1.0-steps. With
[P]
the selection is confirmed and
the device changes into menu level.
Rounding of display values,
Default:
This function is for instable display values, where the display value is changed in
increments of 1, 5, 10 or 50. This does not affect the resolution of the optional
outputs. With
[P]
the selection is confirmed and the device changes into menu
level.
Menu group level
Menu level
then