2. Assembly
2
2. Assembly
Please read the
Safety advices
on
page 43
before installation and keep this user manual for
future reference.
Seali
ng
48
,0
3,0
Ins
tall
atio
n d
ept
h in
cl.
plu
g-in
ter
mn
al
IM2
Gap for physical unit
89,
0
1. After removing the fixing elements, insert the device.
2. Check the seal to make sure it fits securely.
3. Click the fixing elements back into place and tighten the clamping screws by hand. Then use
a screwdriver to tighten them another half a turn.
CAUTION! The torque should not exceed 0.1 Nm!
The dimension symbols can be exchanged before installation via a channel on the side!