5. Setting up the device
16
5.4. Extended parameterisation
(Professional operation level)
5.4.1. Signal input parameters
Menu level
Parameterisation level
Selection of the input signal,
Default:
If the scaling of the device is done via
(Sensor calibration), the frequency
range needs to be preset under
and is adjusted by application of the final
value / initial value. If
(Factory calibration) is preferred, the final value needs
to be entered under
and the final frequency needs to be entered under
.
Under
the initial value needs to be entered and under
the initial
frequency. There is no application of the measuring signal.
is the rotation in
r.p.m. up to 10 kHz input frequency.
is the position recognition per
incremental encoder. Confirm the selection with
[P]
and the display switches back
to menu level.
Adjustment of pulses per rotation,
:
Default:
This parameter ist only important if
=
or =
has been selected.
Generally it shows the number of pulses per rotation.
Menu group level
Menu level