13
5. Setting up the device
Menu level
Parameterisation level
Setting up the initial value of the analog output,
Default:
The final value is adjusted from the smallest digit to the highest digit with
[▲] [▼]
and digit by digit confirmed with
[P]
. A minus sign can only be parameterised on
the highest digit. After the last digit, the device changes back into menu level.
Threshold values / limit values,
Default:
For both limit values, two different values can be parameterized. With this, the
parameters for each limit value are called up one after another.
Hysteresis for limit values,
Default:
For all limit values exists a hysteresis function, that reacts according to the settings
(threshold exceedance / threshold undercut).
Function if display falls below / exceeds limit value,
Default:
The limit value undercut can be selected with
(LOW = lower limit value) and
limit value exceedance can be selected with
(HIGH = upper limit value). If e.g.
limit value 1 is on a switching threshold of 100 and occupied with function
, the
alarm will be activated by reaching the threshold. If the limit value is allocated to
, an alarm will be activated by undercut of the threshold..
Threshold values / limits,
Default:
This value defines the threshold, that activates/deactivates an alarm.
