5. Setting up the device
28
Menu group level
5.4.4. Analog output parameters
Menu level
Menu level
Parameterisation level
Selection reference of analog output,
Default:
The analog output signal can refer to different functions, in detail these are the
current measurand, the min-value, the max-value, the totaliser function / sum
function, the constant value or the difference between current measurand and
constant value. If
is selected, the signal of the analog output will be kept. It
can be continued processing after a deactivation of
. With
[P]
the selection is
confirmed and the device changes into menu level.
Selection analog output,
Default:
Three output signals are available 0-10 VDC, 0-20 mA and 4-20 mA. Select the
desired signal with this function.
Setting the final value of the analog output,
Default:
The final value is adjusted from the smallest to the highest digit with
[▲] [▼]
and
confirmed digit per digit with
[P]
. A minus sign can only be parameterised on the
leftmost digit. After the last digit the device changes back into menu level.
