5. Setting up the device
20
Menu level
Parameterisation level
Number of additional setpoints,
Default:
30 additional setpoints can be defined to the initial value and final value, so linear
sensor values are not linearised. Only activated setpoint parameters are
displayed.
Display values for setpoints,
Under this parameter setpoints are defined according to their value. At the sensor
calibration, like at final value/offset, one is asked at the end if a calibration shall be
activated.
Analog values for setpoints,
These setpoints are displayed at works setting (4-20 mA) only. Here, demanded
analog values can be choosen freely. The input of steadily rising analog values
needs to be done self-contained.
Display underflow,
Default:
With this function the device undercut (
) can be defined on a definite value.
Display overflow,
Default:
With this function the display overflow (
) can be defined on a definite value.
