5. Setting up the device
23
Menu level
Parameterisation level
Zero point slowdown,
Default:
At the zero point slowdown, a value range around the zero point can be preset, so
the display shows a zero. If e.g. a 10 is set, the display would show a zero in the
value range from -10 to +10; below continue with -11 and beyond with +11.
Definite contstant value,
:
Default:
The constant value can be evaluated via the alarms or via the analog output, like
the current measurand. The decimal place cannot be changed for this value and is
taken over by the current measurand. Like this a setpoint generator can be
realised via the analog output by this value. Furthermore it can be used for
calculating the difference. At this the constant value is substracted from the current
measurand and the difference is evaluated in the alerting or by the analog output.
Thus regulations can be displayed quite easily.
Minimum constant value,
:
Default:
The minimum constant value is adjusted from the smallest to the highest digit with
the navigation keys
[
▲
] [
▼
]
and confirmed digit per digit with
[P]
. A minus sign
can only be adjusted on the leftmost digit. After the last digit the display changes
back into menu level.
Maximum constant value,
:
Default:
The maximum constant value is adjusted from the smallest to the highest digit with
the navigation keys
[
▲
] [
▼
]
and confirmed digit per digit with
[P]
. A minus sign
can only be adjusted on the leftmost digit. After the last digit the display changes
back into menu level.
