10
Menu level
Parameterisation level
Setting end value of the measuring range,
:
Default:
Choose between six different frequency ranges. Confirm the selection with
[P]
and
the display switches back to menu level.
Setting the final value of the measuring range,
:
Default:
Set the final value from the smallest to the highest digit with
[▲] [▼]
and confirm
each digit with
[P]
. A minus sign can only be parameterized on the highest value
digit. After the last digit, the display switches back to the menu level. If
was
selected as input option, you can only select between
and
With
, only
the previously set display value is taken over, and with
, the device takes over
both the display value and the analogue input value.
Setting the start/offset value of the measuring range,
:
Default:
Enter the start/offset value from the smallest to the highest digit
[▲] [▼]
and
confirm each digit with
[P]
. After the last digit the display switches back to the
menu level. If
was selected as the input option, you can only select between
and
With
, only the previously set display value is taken over, and
with
, the device takes over both the display value and the analogue input
value.
5. Setting up the device
9.9999 Hz
99.999 Hz
999.99 Hz
9.9999 kHz
99.999 kHz
999.99 kHz
