5. Setting up the device
27
Menu level
Parameterisation level
Master code,
Default:
By entering
the device will be unlocked and all parameters are released.
Release/lock analog output parameters,
Default:
Analog output parameter can be locked or released for the user:
- At
the initial or final value can be changed in operation mode.
- At
the output signal can be changed from e.g. 0-20 mA to 4-20 mA or 0-10
VDC.
- At
analog output parameters are released.
- At
all analog output parameters are locked.
Release/lock alarm parameters,
Default:
This parameter describes the user release/user lock of the alarm.
, here only the range of value of the threshold values 1-4 can be changed.
-
, here the range of value and the alarm trigger can be changed.
-
all alarm parameters are released.
-
all alarm parameters are locked.
Back to menu group level,
:
With
[P]
the selection is confirmed and the device changes into menu group level
.
