5. Setting up the device
22
Menu level
Parameterisation level
Arithmetic,
Default:
With this function the calculated value, not the measuring value, is shown in the
display. Calculation types
rEZIP = (Final value*Final value)/Display value
rAdiC = Root(Display value*Final value)
SqUAr = (Display value)²/Final value
Advice:
The denominator of fractions should not be 0 because a division by 0 is
not possible. It creates an undefined state and the display goes into the overflow.
With
, no calulation is deposited. With
[P]
the selection is confirmed and the
device changes into menu level.
Sliding average determination,
Default:
Here, the number of the meterings that need to be averaged is preset. The time of
averaging results of the product of measuring time
and the averaged metering
. With the selection of
in the menu level
the result will be shown in the
display and evaluated via the alarms.
Dynamic for the sliding average determination,
Default:
With
the sliding average determination can be adjusted dynamically. If 6pro or
12pro is selected, a frequency value with a variance of 6% or 12% of the current
display value is taken over directly for the sliding averaging. The display appears
to be more dynamic at a fast frequency change, without appearing disturbed by a
slightly unsteady frequency.
Reciprocal
Root extraction
Square
