![background image](http://html2.mh-extra.com/html/icom/id-52a/id-52a_advanced-manual_3776585071.webp)
5
D-STAR OPERATION (ADVANCED)
5-30
Repeater list
You can save repeater information for quick and
simple communication in up to 2500 repeaters
(repeater list) in up to 50 Groups�
Data must be in the repeater list to use the DR
function�
You can add and edit repeater content and groups in
the repeater list�
You can enter 4 types of frequencies into the repeater
list, as shown below:
• DV Repeater
• DV Simplex
• FM Repeater
• FM Simplex
TIP:
• For easy operation, the repeater list is preloaded
into your transceiver� However, if you do an
All Reset, the CPU deletes all setting data, the
Memory channels, and the repeater list� We
recommend that you back up the memory data to
a microSD card or save it to a PC using the CS-52
programming software
�
• The repeater list can be downloaded from the Icom
website� See “Updating the repeater list” that can
be downloaded from the Icom website about how
to update the repeater list using a microSD card�
https://www.icomjapan.com/support/
D
Repeater list contents
The following contents are included in the repeater list:
• TYPE:
Communication type (p� 5-32)
• NAME:
Repeater name (p� 5-32)
• SUB NAME:
Repeater sub name (p� 5-32)
• CALL SIGN:
Repeater call sign and port letter
(p� 5-32)
• GW CALL SIGN: Gateway repeater’s call sign and port “G”
(p� 5-32)
• GROUP:
Repeater group (p� 5-33)
• USE (FROM):
access repeater use (p� 5-33)
• FREQUENCY:
access repeater’s frequency (p� 5-33)
• DUP:
Duplex direction (p� 5-33)
• OFFSET FREQ: Frequency offset (p� 5-33)
• MODE:
Operating mode (p� 5-34)
• TONE:
Tone setting (p� 5-34)
• REPEATER TONE: Repeater tone (p� 5-34)
• POSITION:
Position data accuracy level (p� 5-34)
• LATITUDE:
Latitude of the repeater (p� 5-34)
• LONGITUDE:
Longitude of the repeater (p� 5-35)
• UTC OFFSET:
UTC Offset (p� 5-35)
Example:
“Hirano” repeater information