![background image](http://html2.mh-extra.com/html/icom/id-52a/id-52a_advanced-manual_3776585190.webp)
12
SET MODE
12-11
DV Set
GPS Data Speed
(Default: Slow)
[MENU] > SET > DV Set > DV Fast Data >
GPS Data Speed
Sets the GPS data speed when the data is sent using
the DV Fast Data function�
• Slow: Sends GPS data at slow speed
(approximately 950 bps)�
• Fast: Sends GPS data at fast speed
(approximately 3480 bps)�
TX Delay (PTT)
(Default: 2sec)
[MENU] > SET > DV Set > DV Fast Data >
TX Delay (PTT)
Sets the time for when the transceiver returns to
receive after sending DV data in the DV Fast Data
mode using [PTT]�
• OFF:
After releasing [PTT], the transceiver
returns to receive�
• 1 ~ 10sec: After releasing [PTT], the transceiver
sends data using the DV Fast Data
mode for this set period�
When the TX data is completely sent
within this set period, the transceiver
automatically returns to receive�
NOTE:
This function is usable only when “DV Data
TX” is set to “PTT�”
Digital Monitor
(Default: Auto)
[MENU] > SET > DV Set >
Digital Monitor
Selects a receive mode when pushing [SQL] in the DV
mode�
• Auto: Receives in the DV mode or the FM mode,
depending on the received signal�
• Digital: Receives in the DV mode�
• Analog: Receives in the FM mode�
Digital Repeater Set
(Default: ON)
[MENU] > SET > DV Set >
Digital Repeater Set
Turns the Digital Repeater Set function ON or OFF�
When accessing a repeater that has a call sign that
is different from the transceiver’s setting, this function
reads the repeater’s transmit signal and automatically
sets the repeater call sign�
• OFF: Turns OFF the function�
• ON: Automatically sets the repeater call sign�
DV Auto Detect
(Default: OFF)
[MENU] > SET > DV Set >
DV Auto Detect
Turns the DV mode Automatic Detect function ON
or OFF� When in the DV mode, if you receive a non-
digital signal, this function automatically sets the
operating mode to the FM mode�
• OFF: Turns the function OFF� The operating mode
is fixed to the DV mode�
• ON: Automatically selects the FM mode for
temporary operation�
RX Record (RPT)
(Default: ALL)
[MENU] > SET > DV Set >
RX Record (RPT)
The transceiver can record the data of up to 50
individual calls� When the received signal includes a
status message (“UR?” or “RPT?”) that is sent back
from the access repeater, you can record up to 50
messages, or only the last call, in the Received Call
Record�
• ALL:
Records up to 50 calls�
• Latest Only: Records only the last call�
[RX>CS] Key
(Default: Call Sign Capture)
[MENU] > SET > DV Set >
[RX>CS] Key
Selects the [RX→CS] Call Sign Capture key operation
when you hold down�
• Call Sign Capture: While holding down, the RX
History is displayed� After
releasing, the last received call
station’s call sign is set to “TO”
(destination)�
• RX>CS List:
When you hold down for 1
second, the RX History is
displayed� Rotate [DIAL] to
select a call sign to set to “TO”
(destination), and then push
[ENT]�
BK
(Default: OFF)
[MENU] > SET > DV Set >
BK
The Break-in (BK) function enables you to break
into a conversation, where the two other stations are
communicating with call sign squelch enabled�
• OFF: Turns OFF the function�
• ON: Turns ON the function�
L
The BK function is automatically turned OFF when the
transceiver is turned OFF�