![background image](http://html2.mh-extra.com/html/icom/id-52a/id-52a_advanced-manual_3776585049.webp)
5
D-STAR OPERATION (ADVANCED)
5-8
“TO” (Destination) setting
“CQCQCQ,” the destination repeater, or station call
sign must be set in “TO” when you make a DV mode
call� You have 9 ways to set the destination�
By rotating [DIAL]
Rotate [DIAL] to select the repeater or Your Call
Sign displayed on the DR screen� (This operation is
disabled when “CQCQCQ” is set�)
To make a Local Area CQ call
Set “CQCQCQ” in “TO” (Destination)� (p� 5-9)
To make a Gateway CQ call
Select a repeater from the Repeater List, if you
want to make a Gateway call� (p� 5-9)
To make a call to a specific station
Select the station call sign in the Your Call Sign list�
(p� 5-10)
To make a call through a Reflector
Select a reflector you want to call through�
(p� 5-14)
To select from RX History
When you receive a call, repeater or caller station
data is saved in RX History�
Select the destination from the record�
(p� 5-10)
To select from TX History
When you make a call, the destination repeater or
called station data is saved in TX History�
Select the destination from the record�
(p� 5-11)
To directly enter the destination station call sign
Directly enter the destination station’s call sign�
(p� 5-11)
To directly enter the destination repeater call sign
Directly enter the destination repeater’s call sign�
(p� 5-12)
TIP:
After you receive the individual station or
repeater’s signal, the call sign can be captured by
holding down the Call Sign Capture key ([RX→CS]),
and you can quickly and easily reply to a call�
TIP: How to change the repeater group:
When “Local CQ” or “Gateway CQ” is
selected, you can change the repeater
group�
To change the repeater group on the DR
screen, push [QUICK], then select “Group
Select�”