5
D-STAR OPERATION (ADVANCED)
5-39
Repeater list operation
D
Skip setting for the DR scan
You can set repeaters as scan skip repeaters� The
selected repeaters are skipped for faster scanning�
You can set the skip setting to all repeaters in the
selected repeater group or individual repeaters�
L
When a repeater is set as a skip repeater, its “USE
(FROM)” setting is automatically set to “NO�” In that
case, the repeater cannot be selected in “FROM” (access
repeater) on the DR screen�
<Individual skip setting>
[MENU] > MEMORY >
Repeater List
1� Push [MENU]�
2� Select “MEMORY” on the second page of the
MENU screen�
3� Select “Repeater List�”
4� Select a repeater group where the repeater you
set the skip setting is listed�
5� Select the repeater to be skipped, and then push
[QUICK]�
6� Select “SKIP�”
L
Displays “SKIP” by the selected repeater�
L
Select “SKIP” again to cancel the skip setting�
L
Select “SKIP All ON” to set the skip setting to all
repeaters in the group�
<Group skip setting>
1� On the REPEATER GROUP screen, select a
repeater group, as described to the left�
2� Push [QUICK], then select “SKIP All ON” to skip
the group’s repeaters during the DR scan�
L
To cancel the skip settings in the group, select “SKIP
All OFF�”
TIP:
• When you select “Repeater List” on the FROM SELECT
screen, you can set the skip setting as described to the
left�
• When “FROM” is selected on the DR screen, push
[QUICK] to set the skip setting, as shown below�
L
Displays “SKIP” in the “FROM” field�
