![background image](http://html2.mh-extra.com/html/icom/id-52a/id-52a_advanced-manual_3776585133.webp)
7
VOICE TX FUNCTION
7-3
Voice TX function
NOTE: BE SURE
to insert a microSD card into the
transceiver�
[MENU] > VOICE >
<<Single TX>>
[MENU] > VOICE >
<<Repeat TX>>
1� Push [MENU]�
2� Select “VOICE�”
3� Select “<<Single TX>>” or “<<Repeat TX>>�”
•
<<Single TX>>:
The recorded voice audio is transmitted only once�
•
<<Repeat TX>>:
The recorded voice audio is repeatedly transmitted�
L
Information
• While transmitting, the SD card icon blinks�
• When you select “<<Repeat TX>>,” the transceiver
repeatedly transmits the recorded voice audio for up to 10
minutes at the interval set in “Repeat Time�”
([MENU] > VOICE > TX Set >
Repeat Time
)
• Any of the following action cancels the transmission�
- Pushing [PTT]
- Turning OFF the transceiver, then turning it ON again�
- Pushing any key (except for [VOL] and [ ])
• After the second transmission, the transmission continues
pausing, if receiving a signal, even if “Busy Lockout” is set
to “ON�”
([MENU] > SET > Function >
Busy Lockout
)
However, if the squelch is manually opened in the
FM mode, the voice audio is repeatedly transmitted,
according to the “Repeat Time” setting�
• You can select whether or not to output the TX voice
audio from the speaker�
([MENU] > VOICE > TX Set >
TX Monitor
)
TIP:
To transmit the recorded voice audio in the
Quick Menu window, push [QUICK], then select
“Voice TX�”
D
Transmitting the recorded voice audio
Blinks
Transmission is
paused