![background image](http://html2.mh-extra.com/html/icom/id-52a/id-52a_advanced-manual_3776585207.webp)
12
SET MODE
12-28
Display
Rainfall
(Default: inch)
[MENU] > SET > Display > Display Unit >
Rainfall
Selects the format to display the amount of rainfall�
L
The default value may differ, depending on the
transceiver version�
Wind Speed
(Default: mph)
[MENU] > SET > Display > Display Unit >
Wind Speed
Selects the format to display the wind speed�
L
The default value may differ, depending on the
transceiver version�
Display Language
(Default: English)
[MENU] > SET > Display >
Display Language
Sets the screen display language to English or
Japanese�
L
This item is displayed only when “System Language” is
set to “Japanese�”
System Language
(Default: English)
[MENU] > SET > Display >
System Language
Sets the system language of the transceiver�
• English: The system language of the transceiver
is English� Only alphabetical characters
(A to Z, a to z, 0 to 9) and symbols (! “ #
$ % & ‘ ( ) * + , - � / : ; < = > ? @ [ \ ] ^ _ `
{ | } ~) can be displayed�
If Japanese characters (Kanji, Hiragana,
and Katakana) are included, the
display shows “=” or “_” instead of that
character� In that case, you can only
delete “=” or “_” in the transceiver’s edit
mode�
• Japanese: The system language of the transceiver
is Japanese� Kanji, Hiragana, and
Katakana characters, and the 2-bytes
symbols can be displayed� To display
such characters in the DR screen or
Menu mode, set “Display Language” to
“Japanese�”
L
When this item is set to “English,” “Display Language” is
not displayed�
When you set the system language of the
transceiver to Japanese, the transceiver has the
capability to display both English and Japanese
characters� HOWEVER, if you select Japanese, all
menu items throughout the transceiver system will
be displayed in only Japanese characters� There will
be no English item names� Unless you are fluent in
reading Japanese characters, use this feature with
extreme caution�
If you have change the transceiver’s language to
Japanese and do not understand the menu system
in the new setting, you will have to change the
language back to English by doing a partial reset
of the transceiver CPU� A partial reset will not clear
your call sign databases�
To do a partial reset of the CPU, do the following
steps:
1� Push [MENU]�
2� Select “SET�”
3� Select the item (with the “etc” icon) shown below�
4� Select the bottom item shown below�
5� Select the upper item shown below�
L
DO NOT
select the lower item� The lower item is
for the All reset function, and the All reset clears all
entries and returns all settings to their factory defaults�
6� Select the upper option�
• When the partial reset is completed, “PARTIAL
RESET” is displayed, then the display automatically
returns to the default screen�