5
D-STAR OPERATION (ADVANCED)
5-34
Entering new information into the repeater list
Step 12. Setting the FM mode
L
When
Step 2. Selecting the communication type
is set to “DV Repeater” or “DV Simplex,” this item is
not displayed�
1� Select “MODE�”
2� Select “FM” or “FM-N�”
Step 13. Setting the tone
L
When
Step 2. Selecting the communication type
is set to “DV Repeater” or “DV Simplex,” this item is
not displayed�
1� Select “TONE�”
2� Select an option�
•
OFF:
Turn OFF the Tone function�
•
TONE:
Select when the repeater requires an access
tone�
•
TSQL:
Select when you want to use the tone
squelch in simplex operation�
Step 14. Selecting the repeater tone frequency
L
When
Step 2. Selecting the communication type
is set to “DV Repeater” or “DV Simplex,” this item is
not displayed�
L
This setting is required when
Step 13. Setting the
tone
is set to “TONE” or “TSQL�”
1� Select “REPEATER TONE�”
2� Rotate [DIAL] to select the repeater tone
frequency, and then push [ENT]�
D
Entering new information into the repeater list
Step 15. Selecting the position data accuracy level
L
When the Near Repeater Search function is not
used, or the distance between your location and
a repeater is not needed, select “OFF,” and go to
Step 18. Setting the UTC offset.
1� Select “POSITION�”
2� Select the position data accuracy level�
•
None:
Select when the repeater has no
position data�
•
Approximate:
Select when the entered position data
is approximate�
•
Exact:
Select when the entered position data
is exactly correct�
Step 16. Entering the latitude
L
This item is displayed only when
Step 15.
Selecting the position data accuracy level
is set
to “Approximate” or “Exact�”
1� Select “LATITUDE�”
2� Rotate [DIAL] to enter the latitude�
L
Push D-pad(
) to move the cursor�
L
To enter a north latitude, select “N,” and to enter a
south latitude, select “S�”
3� After entering, push [ENT]�
